Globalization and the Digital Divide Essay Example for Free

Globalization and the Digital Divide Essay The globalization era has been developing in recent years. The use of technology has an important role in running the business. Any information about companies can be known in a second. This condition pushes the people in business to provide the accurate, detail and trusted information which is related to the company. It also makes the company compete to improve the performance of their operational activities. To help understand how modern business development, every company definitely has an orientation to make a high profit, therefore the company tries to build a good image in public. Companies will compete to increase their success both in industry and trade field. At first, the company will be profit-oriented, but as it progresses, it is not only focused on profit-making but also focused on social responsibility to keep the company alive. Companies must think about the impact on their environment. Rapid business development drives industry growth, especially in Indonesia. An industrial activity must be related to the utilization of resources and produce valuable products. This will have a direct and indirect impact on the environment. The natural resource management industry, especially the management of non-renewable resources (petroleum, natural gas, coal industries, etc.) is a short-term industry, but it has a long-term impact on the environment. Despite having a positive impact on the economy of a country, an industrial activity also has a negative impact on the surrounding environment. Negative impacts due to activities that cause environmental damage, should be minimized first for the good of the company and the community. At the same time, governments, stock exchanges, markets, investors and the public require companies to be transparent about the goals, performance, and impacts of their sustainability. Then came the practice of CSR (Corporate Social Responsibility) in the business world. CSR is the companys contribution to the stakeholders towards sustainable development by minimizing the negative impact of operational activities. Now CSR is widely known and in Indonesia has many companies that apply it. In addition, the policy has been made regarding the disclosure of CSR as stipulated in Law of the Republic of Indonesia Number 40 of 2007 and mentioned that a company that carries out its business activities in relation to natural resources, is obliged to carry out social and environmental responsibility. CSR is expressed in a report called Sustainability Report. As reported in www.globalreporting.org (2017), Sustainability Report is a report published by the company about the economic, environmental, and social impacts caused by daily operational activities of the company. One of the guidelines that can be used by companies in carrying out CSR activities is the GRI (Global Reporting Initiative). GRI is an international non-profit organization with network-based structure. GRI encourages the implementation of reporting with Sustainability Report as a way for companies and organizations to become more sustainable and contribute to a sustainable global economy. Companies report their activities based on principles and disclosures of standards in accordance with GRI Generation 4 (G4 Guidelines). In that way, the companies will feel the importance of CSR reporting that can improve their image, bring profit and ensure the survival of the company. However, if a company does not report CSR, it will create a conflict with stakeholders. Manufacturing is an industry whose main activity is processing or converting raw materials into finished or semi-finished goods so that goods have added value. Each processing of raw materials from manufacturers would produce waste, causes the environment to feel its impact. The large number of manufacturing companies operating in Java Island, making Java is the largest contributor of waste in Indonesia (National Geographic Indonesia, 2011). That is why covering the issue of environmental damage must be with a high skepticism. Because, besides a large number of output produced by the manufacturing company for its operational activities, it is still more output to be spent to repair environmental damage. Cases of thousands of liters of oil owned by PT Central Georgette Nusantara Printing (CGNP) that spill out pollutes Cibingbin River in Bandung, West Java makes people uneasy because the waste has been polluting the river that empties into the Sanguling Reservoir. The companys operational activities in this area cause environmental damage and harm the people around. It also causes two hectares of paddy fields managed by local people, threatened crops failing. This condition makes people consider the environmental issues are the main ones. After getting pressure from both the government and the people around the factory, the company is ultimately responsible for the environmental pollution issue. The case above pushes the role of CSR as a business-enhancing success for a company. This research is using firm size, profitability, leverage, public ownership and industry sensitivity as independent variables and CSR disclosure which uses G4 guidelines as the dependent variable. Firm size is an indicator that can indicate a condition or characteristic (large or small) of a company. Large companies are more in demand by analysts and brokers because they tend to be easy to publish financial reports and tend to be in stable performance positions (Astuti Nugrahanti, 2015). Profitability measures the overall effectiveness of management in generating profits with its assets (Smart Graham, 2010, p. 66). It means to measure the activity of the company in earned net profit. Leverage provides a description of the companys capital structure, thus it can use to see the level of risk of uncollectible debt (Fahrizqi, 2010). Public ownership is the proportion of share ownership owned by the public of the companys shares (Arthana, 2012). Industry sensitivity can be interpreted a s how big the influence of industrial activity that is directly related to the environment (Winarsih, 2015). The research about the determinant of CSR has been done by some researchers such as Arthana (2012) showed that public ownership and firm size have no significant effect on CSR disclosure. Meanwhile, leverage and profitability have a significant effect on CSR disclosure. However, it was a different research by Kusuma (2012). It showed that that firm size and public ownership have a significant effect on CSR disclosure and leverage does not affect the CSR disclosure. The research by Kusuma (2012) was support by Wijaya (2012), Zanirah (2012) and M. Nur D. Priantinah (2012) showed that firm size significantly influences, but to leverage and profitability does not affect the disclosure of social responsibility. Zanirah (2012) showed that the firm size has a positive significant effect and leverage has a negative effect, while profitability has no significant effect on CSR disclosure. M. Nur D. Priantinah (2012) showed that profitability and public ownership have no significant effect on CSR disclosure. Firm size has a positive significant effect and leverage has a negative significant effect. C. Putra (2012) has a different result compared with M. Nur D. Priantinah (2012) and Zanirah (2012). It showed that firm size has a significant effect on CSR disclosure in manufacture companies while leverage, profitability, and public ownership have no significant effect. From earlier studies that show the different effects on CSR disclosure exhibit the research gap with different variable and different object push the researcher to retest research by C. Putra (2012) by adding a variable to improve the results about â€Å"THE EFFECT OF FIRM SIZE, PROFITABILITY, LEVERAGE, PUBLIC OWNERSHIP AND INDUSTRY SENSITIVITY ON CSR DISCLOSURE (A CASE STUDY OF MANUFACTURING COMPANIES LISTED IN INDONESIA STOCK EXCHANGE YEAR 2013-2017)† Research Questions Based on the background, the research questions that are discussed in this research are: Does firm size have a partial effect to CSR disclosure on manufacturing companies listed in Indonesia Stock Exchange at 2013-2017? Does profitability have a partial effect to CSR disclosure on manufacturing companies listed in Indonesia Stock Exchange at 2013-2017? Does leverage have a partial effect to CSR disclosure on manufacturing companies listed in Indonesia Stock Exchange at 2013-2017? Does public ownership have a partial effect to CSR disclosure on manufacturing companies listed in Indonesia Stock Exchange at 2013-2017? Does industry sensitivity have a partial effect to CSR disclosure on manufacturing companies listed in Indonesia Stock Exchange at 2013-2017? Do firm size, profitability, leverage, public ownership and industry sensitivity have a simultaneous effect to CSR disclosure on manufacturing companies listed in Indonesia Stock Exchange at 2013-2017? Research Limitation The discussion of the problem is limited to affecting some variable to CSR disclosure, which consists of firm size, profitability, leverage, public ownership and industry sensitivity. The company which is observed is manufacturing companies listed on Indonesia Stock Exchange at 2013-2017. Research Purpose To analyze whether firm size has a partial effect to CSR disclosure to manufacturing companies listed in Indonesia Stock Exchange at 2013-2017. To analyze whether profitability has a partial effect to CSR disclosure to manufacturing companies listed in Indonesia Stock Exchange at 2013-2017. To analyze whether leverage has a partial effect to CSR disclosure to manufacturing companies listed in Indonesia Stock Exchange at 2013-2017. To analyze whether public ownership has a partial effect to CSR disclosure to manufacturing companies listed in Indonesia Stock Exchange at 2013-2017. To analyze whether industry sensitivity has a partial effect to CSR disclosure to manufacturing companies listed in Indonesia Stock Exchange at 2013-2017. To analyze whether firm size, profitability, leverage, public ownership and industry sensitivity have a simultaneous effect to CSR disclosure to manufacturing companies listed in Indonesia Stock Exchange at 2013-2017. Benefit For Company This study is expected to give information for manufacturing companies in preparing meaningful sustainability reports and making steady sustainability reporting and directed to standard practice. It contributes to the understanding of determinants of CSR disclosure to improve the implementation of disclosure guidelines. This study is expected to be an input for companies in doing consideration and decision making which will be useful in providing an additional value of the company. For investor As an overview of CSR disclosure that serves as a reference for investment decision making. For accounting department As a meaningful contribution to the accounting department to develop a study of financial management especially for CSR disclosure. For student This study helps extends the scope of previous studies by introducing independent and dependent variables engage with CSR. The results of this study are expected to be a reference and comparison for further research, which is a concern with the CSR disclosure. Glossary Firm Size Firm size is the number of assets owned by the company. Thus, the large and small of a company can be seen by its assets ADDIN CSL_CITATION { citationItems : [ { id : ITEM-1, itemData : { DOI : 10.1017/CBO9781107415324.004, ISBN : 9788578110796, ISSN : 1098-6596, PMID : 25246403, author : [ { dropping-particle : , family : Rahman, given : Arif, non-dropping-particle : , parse-names : false, suffix : }, { dropping-particle : , family : Widyasari, given : Kurnia Nur, non-dropping-particle : , parse-names : false, suffix : } ], container-title : Jurnal Akuntansi Auditing Indonesia, id : ITEM-1, issue : 1, issued : { date-parts : [ [ 2008 ] ] }, page : 25-35, title : The analysis of company characteristic influence towards CSR disclosure: Empirical evidence of manufacturing companies listed in JSX, type : article-journal, volume : 12 }, uris : [ http://www.mendeley.com/documents/?uuid=ad81e84f-e72e-4aeb-998f-b3df3f96da8f ] } ], mendeley : { formattedCitation : (Rahman Widyasari, 2008 ), plainTextFormattedCitation : (Rahman Widyasari, 2008), previouslyFormattedCitation : (Rahman Widyasari, 2008) }, properties : { noteIndex : 9 }, schema : https://github.com/citation-style-language/schema/raw/master/csl-citation.json }(Rahman Widyasari, 2008). Profitability Profitability measure the focus on company profits ADDIN CSL_CITATION { citationItems : [ { id : ITEM-1, itemData : { author : [ { dropping-particle : , family : Marcus, given : Brealey Myers, non-dropping-particle : , parse-names : false, suffix : } ], edition : Lima, id : ITEM-1, issued : { date-parts : [ [ 2006 ] ] }, number-of-pages : 372, publisher : Erlangga, title : Dasar-Dasar Manajemen Keuangan Perusahaan Jilid 2, type : book }, uris : [ http://www.mendeley.com/documents/?uuid=eaa4ed05-0031-4fc6-9f14-1d31d7503a15 ] } ], mendeley : { formattedCitation : (Marcus, 2006), manualFormatting : (Marcus, 2006, p. 80), plainTextFormattedCitation : (Marcus, 2006), previouslyFormattedCitation : (Marcus, 2006) }, properties : { noteIndex : 9 }, schema : https://github.com/citation-style-language/schema/raw/master/csl-citation.json }(Marcus, 2006, p. 80). Big companies are expected to earn more profit than small companies. It also measures the using of the efficiency of company assets AD DIN CSL_CITATION { citationItems : [ { id : ITEM-1, itemData : { author : [ { dropping-particle : , family : Husnan, given : Suad, non-dropping-particle : , parse-names : false, suffix : }, { dropping-particle : , family : Enny Pudjiastuti, given : , non-dropping-particle : , parse-names : false, suffix : } ], edition : Pertama, id : ITEM-1, issued : { date-parts : [ [ 1996 ] ] }, publisher : Unit Penerbit dan Percetakan (UPP) AMP YKPN, publisher-place : Yogyakarta, title : Dasar-Dasar Manajemen Keuangan, type : book }, uris : [ http://www.mendeley.com/documents/?uuid=561254b1-8c37-4dae-9f07-9552249e0f60 ] } ], mendeley : { formattedCitation : (Husnan Enny Pudjiastuti, 1996), manualFormatting : (Husnan Enny Pudjiastuti, 1996, p. 73), plainTextFormattedCitation : (Husnan Enny Pudjiastuti, 1996), previouslyFormattedCitation : (Husnan Enny Pudjiastuti, 1996) }, properties : { noteIndex : 9 }, schema : https://github.com/citation-style-language/schema/raw/master/csl-citation.json }(Husnan Enny Pudjiastuti, 1996, p. 73). Leverage Leverage means measuring the companys ability to fulfill its financial obligations. It can be that leverage is measure how far the company uses debt ADDIN CSL_CITATION { citationItems : [ { id : ITEM-1, itemData : { author : [ { dropping-particle : , family : Husnan, given : Suad, non-dropping-particle : , parse-names : false, suffix : }, { dropping-particle : , family : Enny Pudjiastuti, given : , non-dropping-particle : , parse-names : false, suffix : } ], edition : Pertama, id : ITEM-1, issued : { date-parts : [ [ 1996 ] ] }, publisher : Unit Penerbit dan Percetakan (UPP) AMP YKPN, publisher-place : Yogyakarta, title : Dasar-Dasar Manajemen Keuangan, type : book }, uris : [ http://www.mendeley.com/documents/?uuid=561254b1-8c37-4dae-9f07-9552249e0f60 ] } ], mendeley : { formattedCitation : (Husnan Enny Pudjiastuti, 1996), manualFormatting : (Husnan Enny Pudjiastuti, 1996, p. 70), plainTextFormattedCitation : (Husnan Enny Pudjiastuti, 1996), previouslyFormattedCitation : (Husn an Enny Pudjiastuti, 1996) }, properties : { noteIndex : 9 }, schema : https://github.com/citation-style-language/schema/raw/master/csl-citation.json }(Husnan Enny Pudjiastuti, 1996, p. 70). Public Ownership Public ownership is the proportion of share ownership owned by the public of the companys shares ADDIN CSL_CITATION { citationItems : [ { id : ITEM-1, itemData : { author : [ { dropping-particle : , family : Arthana, given : Ronny, non-dropping-particle : , parse-names : false, suffix : } ], container-title : Jurnal Ilmiah Mahasiswa FEB UB, id : ITEM-1, issue : 2, issued : { date-parts : [ [ 2012 ] ] }, page : 1-14, title : Pengaruh Karakteristik Perusahaan Terhadap Pengungkapan Tanggung Jawab Sosial Perusahaan (CSR) Pada Perusahaan Yang Terdaftar Di Indeks LQ45 Bursa Saham Indonesia (BEI), type : article-journal, volume : 1 }, uris : [ http://www.mendeley.com/documents/?uuid=848daaaf-51e9-409e-b044-80ae139493e6 ] } ], mendeley : { formattedCitation : (Arthana, 2012), plainTextFormattedCitation : (Arthana, 2012), previouslyFormattedCitation : (Arthana, 2012) }, properties : { noteIndex : 9 }, schema : https://github.com/citation-style-language/schema/raw/master/csl-citation.json }(A rthana, 2012). The bigger the share which is owned by the public, the more information will be explained, the investors want to get more information about its investment and make sure that it is safely managing then the obligation will be fulfilled. Industry Sensitivity Industry sensitivity can be interpreted as how big the influence of industrial activity that is directly related to the environment ADDIN CSL_CITATION { citationItems : [ { id : ITEM-1, itemData : { author : [ { dropping-particle : , family : Winarsih, given : Arga Mustika, non-dropping-particle : , parse-names : false, suffix : } ], id : ITEM-1, issued : { date-parts : [ [ 2015 ] ] }, title : Pengaruh Media Online , Sensitivitas Industri Dan Struktur Corporate Governance Terhadap Kualitas Environmental Disclosure Governance (Studi Pada Perusahaan High Profile di BEI), type : report }, uris : [ http://www.mendeley.com/documents/?uuid=d495d810-1aa1-41f2-8dc4-6690588eae85 ] } ], mendeley : { formattedCitation : (Winarsih, 2015), plainTextFormattedCitation : (Winarsih, 2015), previouslyFormattedCitation : (Winarsih, 2015) }, properties : { noteIndex : 10 }, schema : https://github.com/citation-style-language/schema/raw/master/csl-citation.json }(Winarsih, 2015).

In Defense of Capital Punishment :: Pro Capital Punishment Essays

In Defense of Capital Punishment There are some words that often return when we defend the death penalty: justice and human dignity. These words also constitute a foundation for that which is called democracy and civilization. These two realities can also be regarded as two bearing pillars in the defense of capital punishment. Justice is a highly regarded word in society and in politics, but within the judicial system and that which concerns crime and punishment, justice has, both as a word and as a conception, ended up existing in the shadows. People want to lift forth this truth in the light, since justice should be the foundation within the legal system. When the death penalty is discussed the aspect of justice should be allowed in the foreground first and foremost. Man has an inviolable dignity and, therefore, deserves the highest respect. Human dignity and respect, not foremost for the one who hurts his fellowman but for the victims of crimes and his relatives, is something that should be brought forth considerably more than today, and especially in connection with the death penalty. But the prerequisite for that is that sympathy and solidarity with the victim should increase in society. In order to rightly value the death penalty it is necessary to have empathy and understanding for all the victims and their relatives. The capital punishment makes up one link on the way to a safer society. The capital punishment means that some heinous criminals never again will walk on the streets, and that makes the society a somewhat safer place. Murderers and violent criminals will always exist in society and the death penalty will only lower the number of criminals marginally. It is inevitable, however, that every violent criminal less that exists in a society will mean a safer society. A prison term on the other hand would mean that there would always be a pressing dark cloud of worries over a society. Also, in prisons the interns and personnel would feel safer with the death penalty. It is not unusual with conflicts, violence and murder in prison. Some interns who have been sentenced to long prison terms or lifetime would probably deter from cruel acts of violence and murder if they knew that it could lead to the death penalty. Today, on the other hand, he who has been sentenced to lifetime in prison cannot be sentenced too much more and, therefore, he would probably neither be deterred from committing further crimes. In Defense of Capital Punishment :: Pro Capital Punishment Essays In Defense of Capital Punishment There are some words that often return when we defend the death penalty: justice and human dignity. These words also constitute a foundation for that which is called democracy and civilization. These two realities can also be regarded as two bearing pillars in the defense of capital punishment. Justice is a highly regarded word in society and in politics, but within the judicial system and that which concerns crime and punishment, justice has, both as a word and as a conception, ended up existing in the shadows. People want to lift forth this truth in the light, since justice should be the foundation within the legal system. When the death penalty is discussed the aspect of justice should be allowed in the foreground first and foremost. Man has an inviolable dignity and, therefore, deserves the highest respect. Human dignity and respect, not foremost for the one who hurts his fellowman but for the victims of crimes and his relatives, is something that should be brought forth considerably more than today, and especially in connection with the death penalty. But the prerequisite for that is that sympathy and solidarity with the victim should increase in society. In order to rightly value the death penalty it is necessary to have empathy and understanding for all the victims and their relatives. The capital punishment makes up one link on the way to a safer society. The capital punishment means that some heinous criminals never again will walk on the streets, and that makes the society a somewhat safer place. Murderers and violent criminals will always exist in society and the death penalty will only lower the number of criminals marginally. It is inevitable, however, that every violent criminal less that exists in a society will mean a safer society. A prison term on the other hand would mean that there would always be a pressing dark cloud of worries over a society. Also, in prisons the interns and personnel would feel safer with the death penalty. It is not unusual with conflicts, violence and murder in prison. Some interns who have been sentenced to long prison terms or lifetime would probably deter from cruel acts of violence and murder if they knew that it could lead to the death penalty. Today, on the other hand, he who has been sentenced to lifetime in prison cannot be sentenced too much more and, therefore, he would probably neither be deterred from committing further crimes.

Just in Time Approach in Inventory Management

2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd JUST IN TIME APPROACH IN INVENTORY MANAGEMENT Abdul Talib Bon (Corresponding author) Faculty of Technology Management, Business and Entrepreneurship Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia Tel: +60127665756 E-mail: [email  protected] com Anny Garai Faculty of Technology Management, Business and Entrepreneurship Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia Tel: +60137016298 E-mail: [email  protected] com. y Abstract Quality improvement and costs control are vital to organizations for work performance enhancement and fulfilling customers’ requirement. Inventories that are stored in large amount of quantities will result in waste and space usage. One effective solution is using Just in Time (JIT) concept as a method to reduce costs, improve quality and meet the ever-changing customer needs. The adoption of Just in Time (JIT) con cepts seems to be the most effective way to overcome these circumstances. JIT is management philosophy that emphasizes on eliminating waste and increase productivity.The main purpose of this research is to find out whether the implementation of JIT would reduce the inventories at Electronics component industry especially at the parts producing stamping of FCM. This research is done by case study. Therefore the data collection would be using secondary data which is the documentation from FCM itself and also via observation. The data were analyzed by doing the comparison before and after the implementation of JIT using Microsoft words excel. From the analysis that had been done, the implementation of JIT had increased the inventories management at the stamping parts production.As the conclusion, the implementation of JIT in the inventory management at the parts production stamping at Electronics component industry had successfully reduce the inventories level while improving the inven tory level. Keywords: Stamping Production, Just in Time, inventory management, electronics component industry. 1. Introduction Globalisation phenomena had created the business without boundaries. Most of the organisation nowadays only focuses in two main elements that can influence the global market, which is customer satisfaction and also the product and services quality.Organisation all around the world need to take the initiative to increase the product quality to satisfy the needs and customer demand that always change besides minimizing the production cost. This initiative is needed to keep the challenge at the market (Canel, et al. , 2000). One of the most effective solutions is with the application of Just in Time (JIT). Application of JIT could involve few important elements at organisation such as production level, marketing level, engineering level and purchasing level. The application of JIT more focuses on management process.Therefore, JIT can be applied at varying proce ss. (Canel, et al. , 2000). JIT is the concept of management that invented specially to avoid waste. This is in order to minimize the waste and increase the productivity (Zhu and Meredith, 1995). JIT is one type of Lean Manufacturing (Yen, 2003). Lean manufacturing is the process to control the production which depends on the demand by the customers. It is also act to reduce waste. The application of Lean Manufacturing can reduce the stock, work space and the production of raw materials. This philosophy can maximize the production (Forza, 1996).At Malaysia context, application of JIT is not popular. According to Simpson, et al. , (1998), JIT had been applied by national automotive firm as a transitory JIT. Transitory of JIT is one of the ad hoc inventory models. This is can give half of the inventory in order to reduce the production 2562 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd cost beside can make the technology transfer at the i nternational level. This research is made to study the application of Just in Time (JIT) in inventory management at stamping production at Electronics component industry. 1. Background of Study At FCM there is lot type of inventories and this requires a huge space to restore it. Therefore FCM need to prepare an enough space. How ever, this situation requires FCM to overcome the cost of restore. But this is not the really big issues to FCM. What really worries FCM management is the huge batch of inventories. The batch of inventories had caused FCM loss in profit because there is no moving out of the output to customer. Therefore the cases are also not only arises due to this problem. Besides that, in Japanese firm, the concept of keeping the inventory is a big waste in industry.Based on this problem, Heizer J. & Render B. (2006), Just in Time (JIT) is the best strategy to increase the operation especially at the inventory management. However, if the raw material cannot be delivered d uring the production, there would be a big problem. 1. 2 Problem Statement This study is to elaborate the JIT application in inventory management at the stamping production at FCM. The problems that occur in this study are what is the importance of application of JIT in order to influence the inventory management at the stamping production at FCM? 1. Objective In this research, researcher has the stand to achieve the objective so that it could be archived. The objective is to study the application of Just in Time (JIT) in inventory management at Stamping Production at Electronics component industry. 1. 4 Scope Of Study The scope of study is focused at the stamping production at Electronics component industry. The main products of FCM are keyboard and relays. Respondents that involved are top management and the staff at stamping production of FCM. Data would be collected through qualitative method and be analysed quantitatively.From this study, the researcher hopes that can help Elec tronics component industry on the applications of JIT in their operation. The researcher hopes that with this study, it can help Electronics component industry and academician which is up to the upcoming researchers. 2. Literature Review JIT is not the new concept in production sector (Stevenson, 2001). It started during 1920 and being used by Henry Ford at the automation industrial. JIT is one of the Lean Manufacturing that had been introduced by Toyota Motor Corporation to increase the work quality and production.The application of JIT in Lean Production will give good return in production process. These philosophies would make the production even faster and to reduce the inventories stock. 2. 1 Lean Production and Lean Manufacturing Lean Manufacturing first introduced as systematic ways to reduce or terminate the waste. It is the management philosophy that require commitment from responsible person that relate with reduced waste, make the work procedure become smooth and optimize the production (Chase, et al. , 2001). Lean Manufacturing firstly introduced by the Toyota Motor Corporation.Which is involved the inventory management, quality control, industrial relationship, 2563 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd employee management and relationship between factory and the suppliers (Bowen and Youngdahl, 1998). JIT is one of the elements in Lean Manufacturing meanwhile Lean Production is known as Big JIT. It is the philosophy of management operation that act to terminate the waste in every aspect in production such as industrial relationship, vendor relationship, technology, raw material management and inventories (Chase, et al. 2001). Lean Production can use to reduce time, inventories, space, employees and production cost. 2. 2 Just In Time (JIT) Usually, JIT process being implemented in the organisation that reached the highest application of JIT. Wagner M. S and Silveira- Camargos V , 2009). This is because organisation and the supplier should have a good relationship and believe because when there is demand from factory, the suppliers can supply them on time. The first way to implement JIT is build a good relationship with the suppliers, customers and also sub-contractor to reduce inventory â€Å"buffer† to few hours.According to Canel, et al. , (2000), JIT aims is to reduce time waiting during production process. Therefore, the cost of inventories not only can be minimized but also the time for the production also shortens. JIT concept is not saying about the standardisation or the way of managing but it really focusing on the zero inventories 2. 3 Benefits of Application of Just In Time in Lean Production The application of JIT would give a lot of benefits such as to the producer to increase the quality to fulfil the customer demands and reduce the inventories and built a good relationship with the supplier (Salaheldin, 2005).Positive of JIT application can successfu lly give benefit to three communities, which is supplier only, purchased only or both. The benefits are, reducing in inventories and time waiting for the inventories, increase the quality and technical support, increase productivity, reduce waste and machine maintenance (Wafa, et al. , 1996). JIT actually help to reduce machine maintenance and at the same time, to make sure the suppliers can produce the inventories on time (Yasin, et al. , 2001). According to Yasin, et al. 2002), the big problem of JIT application is employer issues and the suppliers. Employer issue is about the objection of JIT concept, less supportive of JIT and less of employees. 3. Methodology This study is using action research that is descriptive and makes the research by quantitative. In this study, researcher would use observation and data collection from the result of the observation. 4. Data Analysis 4. 1 Introduction This chapter would discuss and analysis the data that had been collected from FCM.There a re four different data that had been provided by the researcher according to the case. For the first case, the researcher would get the standard time during the raw material collected from the rack and the replace at the turn table using forklift. The second case is the machine die setup. Meanwhile the third case is standard time for winding process. The time is counted during the winding process and the material place at the stand before and after the winding process. For the last case, is during packing and deliver the part to the warehouse.This chapter also would discuss about type of test and analysis to the case to make sure that the data is valid and researcher can get a clear vision about the elements of Just in Time (JIT) being implemented by the FCM. 2564 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd 4. 2 Results of Study In this study, researcher would discuss the results that researcher gets from the study. All the data that had been collected by the researcher would be divided according to the case and according to the flow chart of stamping production refer to Figure 1.Figure 1 shows Standard Time (ST) and Cycle Time (CT) according to the cases that had been studied. ST = 10. 8 min CT = 10 times ST = 480 min ST = 5. 37 min ST = 17 min KES 1 KES 2 KES 3 KES 4 Raw Material Stamping Process Winding Packing Warehouse Figure 1: Stamping Flow Chart 4. 2. 1 Analysis of Case 1 This section would show the data collected from case 1 for the application before and after the part production stamping. In this case 1 (refer Figure 2) the standard time would be the counting from the raw materials from the racks to the turntable using forklift and then the return back of the forklift to the place.Refer from Figure 3 as shown the graphs for before and after the applications of JIT for case 1. ST/CT Raw Material Stamping Process Figure 2: Case 1 2565 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd Figure 3: Graph Before and After Application of JIT (Case 1) 4. 2. 2 Analysis of Case 2 For case 2, (refer Figure 4) is to reduce the standard time that is using for die setup. Figure 5 showed the graph before and after application of JIT. . ST Stamping Process Figure 4: Case 2 Winding 2566 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING d nd Figure 5: Graph Before and After Application of JIT (Case 2) 4. 2. 3 Analysis Case 3 For case 3, (refer Figure 6) is to reduce standard time for winding process. Figure 7show before and after application of JIT for Case 3. ST Winding Figure 6: Case 3 Packing 2567 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd Figure 7: Graph Before and After Application of JIT (Case 3) 4. 2. 4 Analysis Case 4 For case 4, (refer Figure 8) is to reduce standard time during packing and deliver to warehouse. Figure 9 show the application of JIT before and af ter. ST PackingFigure 8: Case 4 Warehouse 2568 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd Figure 9: Graph Before and After Application JIT (Case 4) 5. Conclusion The purpose of this study is to make sure the application of concept Just In Time (JIT) at Electronics component industry especially at the stamping production. This chapter would discuss about the results of the analysis according to the objective and problem statement. The discussion would focus in certain case at stamping production depend of the results that analyze from before and after the application of JIT.Besides that, this chapter also would discuss the suggestion. After the analysis, application JIT in inventory management at stamping production is depend on the activities below: (i) (ii) (iii) (iv) (v) (vi) (vii) (viii) (ix) Raw material always in enough quantities. Work in process always at the minimum quantities. Finished good would directly deliver to buyers. Wasting work in process seldom occur. Buffer stocks always at the minimum quantity. Delivering raw material depends on demand only. Space for inventories is small. Time table scheduling is made by the suppliers.Delivering materials is more often and only at small size. 2569 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd (x) (xi) (xii) Long term relationship is built between suppliers. Suppliers is advised to use the application of Just in Time (JIT) , and The employers should give the commitment on inventories and quality. Besides that, researcher has little suggestion to the upcoming interested researchers with the concept of Just in Time. The suggestions are: (i) this research only limited at one factory which is Electronics component industry.The next researcher should broaden their scope of study; (ii) Future study on the application of JIT concept especially in the purchasing and engineering level; and further study about the elemen ts associated with JIT. References Bowen, D. E. & Youngdahl, W. E. (1998). Lean Service: In Defence of A Production-Line Approach. International Journal of Service Industry Management. 9(3). 207-225. Canel, C. , et al. (2000). Just-in-time Is Not Just for Manufacturing: A Service Perspective. Industrial Management and Data System. 100(2). 51-60 Chase R. B. , et al. (2001). Operations Management for Competitive Advantage. th ed. N. Y. : McGraw-Hill. 394-417. Forza, C. (1996). Work Organization in Lean Production and Traditional Plants: What Are the differences?. International Journal of Operation and Production Management. 16(2). 42-62. Salaheldin, S. I. (2005). JIT Implementation in Egptian Manufacturing Firms: Some Emperical Evidence. International Journal of Operation and Production Management. 25(4). 354-370. Simpson, M. , et al. (1998). Case Study: Transitory JIT as Proton Cars, Distribution and Logistics Management. 28(2). 121-142. Malaysia. International Journal of Physical St evenson, G. (2001).Just-in-time: The Reincarnation of Past Theory and Practice. Management Decision. 39(10). 866-879. Wafa, M. A. , et al. (1996). The Impact of Supplier Proximity on JIT Success: An Information Perspective. International Journal of Physical Distribution and Logistics Management. 26(4). 23-34. Yasin, M. Y. , et al. (2001). Just-in-time Implementation in the Public Sector. International Journal of Operation and Production Management. 21(9). 1195-1204 Zhu, Z. & Meredith, P. H. (1995). Defining Critical Elements in JIT Implementation: A Survey. Industrial Management and Data System. 95(8). 21-28. 2570

Cathedral Essay - 598 Words

When most people think of blind people, they tend to picture a person with dark sunglasses, a seeing eye dog, and a walking stick. These are stereotypes and obviously do not remain true in the case of all blind people. In Raymond Carveramp;#8217;s short story amp;#8220;Cathedral,quot; the main character is jealous and judgmental of his wifeamp;#8217;s friend who happens to be a blind man. It is the combination of these attitudes that leads to his own unique amp;#8220;blindness.quot; It is through this initial blindness, that the character gains his greatest vision. nbsp;nbsp;nbsp;nbsp;nbsp;The short story amp;#8220;Cathedral; includes three characters. These characters include the narrator, his wife, and her blind friend†¦show more content†¦The narratoramp;#8217;s wife had worked for Robert as a summer job, many years back. The two had kept in contact with each other through audio tapes. The narratoramp;#8217;s wife shared a special moment with Robert, he rubbed her face and felt her features. The narratoramp;#8217;s wife had written poetry about that occurrence. The fact that his wife felt that way about the event, had the narrator extremely jealous. When his wife tried to play one of the tapes that Robert had sent for her husband, the narrator paid little attention and a small distraction had him on his way. Once the narrator and Robert had a chance to actually sit down and speak with each other, the narrator finally did have an understanding and made some realizations about himself. nbsp;nbsp;nbsp;nbsp;nbsp;Robert, the narrator, and his wife spent a lot of time speaking with each other. They spoke on various subjects, and the narrator learned that Robert was an interesting character. At one point, the narratoramp;#8217;s wife leaves Robert and the narrator alone, during this time, the two men continue speaking and decide to smoke a joint together. Their conversation leads them to the topic of Cathedrals. Robert has never seen a cathedral, and the narrator has never paid too much attention to one. Robert asks the narrator to take his hand and draw a cathedral. TheyShow MoreRelatedCathedral684 Words   |  3 PagesCathedral It is an ongoing problem that people are narrow-minded and have preconceptions. It does no one good and is an obstacle in your everyday life. By closing your eyes, the other senses, like feeling, hearing and smelling, tune in and take over. A lot can be learned from these senses and new truths can be unrevealed. In the short story Cathedral, the main character stops his prejudices and sees a new truth. The short story Cathedral takes place in the 1990s in a married couple’s house inRead MoreThe Cathedral Of Canterbury Cathedral1209 Words   |  5 PagesThe word Cathedral is a Latin word for chair â€Å"Cathedra† which was taken from the Greek ‘Kathedra’ meaning seat. The Canterbury Cathedral is located in England, United Kingdom. The Cathedral is one of the most famous and oldest Christian structures in England. 597 AD was the founding of Canterbury Cathedral. The cathedral’s physical context is located in a sprawl area meaning there is low density residential, there are many other attractions around such as the theatre,hotel and museum. Saint AugustineRead MoreAnalysis Of Cathedral By Raymond Carver1541 Words   |  7 PagesA New Perspective Everyone at one point has judged a book by its cover. In the short story, â€Å"Cathedral†, Raymond Carver creates a narrator who bases off ideas and assumptions about blind people from movies. The narrator has never interacted with a blind person before the day where his wife invites her friend, who is named Robert, to stay. The narrator and Robert have never met, but the narrator has a strong dislike towards Robert before meeting. The narrator’s closed-mindedness and misconceptionsRead MoreCathedral As A Central Catholic Church1122 Words   |  5 PagesCathedral is a central Catholic church. Differences between cathedrals and churches are that cathedrals are the seat of the bishop and a centre of worship and mission. (The Association of English Cathedrals) Because it s a central of Catholic churches, all the Catholic churches around a cathedral receives order and worship services from it. Cathedrals are known for central position in Catholic, but what we have to fo cus is beauty of their art of structures and art of symbolism. There are many CatholicRead MoreEssay on The Cathedral by Raymond Carver980 Words   |  4 PagesCathedral is a short story ultimately about enlightment, finding something more meaningful and deeper with in one self. Although from an observing point of view nothing more in the story happens then a blind man assisting the narrator in drawing a cathedral. Although as known, the narrators experience radically differs from what is actually observed. He is enlightened and opened up to a new world of vision and imagination. This brief experience will have a life long effect on him. The reasonRead MoreT.S.Eliot Murder in the Cathedral1975 Words   |  8 PagesT.S. Eliots Murder in the Cathedral tells the story of Thomas Beckett, a man who reigned as Archbishop of Canterbury during the 12th century in England until his death in 1170. In order to tell Becketts story, Eliot creates a series of equally interesting characters that each play a crucial role thought the play. The most unique rolefound within the play is the Women ofCanterbury, or the Chorus. Throughout the piece, the Chorus delivers seven choral odes. These choral odes, when looked at as aRead MoreLooking Beyond the Surface at Raymond Carvers Cathedral660 Words   |  3 PagesIt seems in life that we often look at things without really seeing them. Raymond Carver demonstrates in â€Å"Cathedral† that looking is associated to physical vision, but seeing involves a deeper level of commitment. The author is making the point when you put yourself into someone elses shoes and allow yourself to see things the way they see them, it can be the most rewarding and eye opening experience. During the exposition, the narrator shows that he has no problems with eyesight and he is capableRead MoreDurham Cathedral Essay854 Words   |  4 PagesDurham Cathedral Durham Cathedral is one of the oldest examples of Romanesque architecture present in England today. Although the cathedral was completed in the early 12th century there are signs of Gothic architecture present due to the close relation of Romanesque and Gothic styles. In Robert Scotts book The Gothic Enterprise he discusses how the early Gothic style pulled heavily from the Romanesque style of architecture and built upon its basic themes. Durham Cathedrals extensive historyRead MoreThe Canterbury Cathedral Essay2561 Words   |  11 PagesThe Canterbury Cathedral For at least fourteen hundred years the worship of God has been offered on the site of this Cathedral, and through the prayers of the Church his power and grace have shaped human lives. Ever since the murder of Archbishop Thomas Becket in the Cathedral in 1170, Canterbury has attracted thousands of pilgrims. This tradition continues to this day, and a large team of Welcomers, Guides, Cathedral Assistants and Chaplains are there to give all visitors a warm welcomeRead MoreAnalysis Milan Cathedral, Italy Essay751 Words   |  4 Pagesthe middle of Milan, Italy in the Piazzo del Duomo is Milan Cathedral, the largest Gothic cathedral and the second largest Catholic cathedral in the world. The exterior and interior appearances are aw-inspiring, commanding respect in our modern day time period and long ago during the time periods in which the Milan Cathedral was constructed. The cathedral also earned respect by being the center for community functions. The Milan Cathedral has outer height of 215 ft and a maximum width of 302 ft allowing

Research Paper about Pacific Islander Surfing Origins and Influence

Surfing, which originated from pacific islands, had a significant and lasting impact on American Culture. â€Å"Its all about where your minds at.† ~ Kelly Slater It is definitely an incontestable fact that surfing has a significant and lasting influence upon the American culture in all its manifestations. Surfing was initially an integral part of the Polynesian culture, and later was adopted by the European settlers, who arrived to the Pacific Islands. Hawaii, Florida and California are considered to be the most vivid representatives of the surf culture and true examples of how surfing has influenced the American culture. Mark Twain, one of the most prominent American writers of the nineteenth century wrote the following when he visited the Hawaiian Islands in 1866: In one place we came upon a large company of naked natives, of both sexes and all ages, amusing themselves with the national pastime of surf-bathing.† (Twain, M., 2007) When Captain James Cook observed how the native Hawaiians mastered the surfboard, he â€Å"†¦ could not help concluding this man had the most supreme pleasure while he was driven so fast and so smoothly by the sea†. The surf culture in the United States aroused in the beginning of the 20th century with the culmination points during the 1950s and 1960s, and yet it continues to flourish. Initially ancient Hawaiians believed that Kahunas (Hawaiian priests) can influence the gods in terms of catching good waves. There ritual songs and dances were supposed to please the gods of the sea and sent native Hawaiians surfable waves. For quite some time Caucasians assumed that only native inhabitants of the Pacific Islands possess the skills to surf. The first large-scale surf competition was held in 1928. Up till now the number of professional surfers is rather small as it is considered to be a difficult sport. (History of surfing. Surf culture., 2010) As a result of such swift development from just a hobby into a full-fledge sport, surfing has become one of the major American exports, similar to Hollywood and rock’n’roll. The surf culture has touched upon all spheres of life starting from music, fashion, cinematography, language and much more. The first wetsuit was manufactures from parts of neoprene by Jack O’Neil in the beginning of the 1950s in California. The wetsuit played a significant role as it preserved the surfers from the cold waters. The wetsuit gave the sportsmen the possibility to practice throughout the year. The surf style comes in and out of fashion every five to ten years. The surf culture has given birth to numerous clothing brands and the entire subclass of the media industry. Dale Velzy in turn is responsible for popularization of surfing. He was the first sponsor of the surf competitions. By giving new modernized surfboards to local surfers he earned their support and collaboration. In th e United States Velzy disclosed surfing to the public. (History of surfing. Surf culture., 2010) When it comes to film making, â€Å"Gidget† (1959) and â€Å"The Endless Summer† (1966) are recognized as the crown jewels of surf cinematography. These movies lightened up the spark of interest towards surfing and surf culture. These masterpieces revealed the surf world to the American population. In addition, John Severson established a photo book called â€Å"The Surfer†, which gradually evolved into a full-scale magazine. It is also considered to be the first publication in the world disclosing the development of surfing. Many youngsters chose famous surfers who ride mind-blowing waves as their idols. Andy Irons (three time  World Champion – 2002, 2003, 2004; holder of three  Quiksilver Pro France  titles – 2003, 2004, 2005; two Rip Curl Pro Search titles – 2006 and 2007 and 20 elite tour victories including the  Vans Triple Crown of Surfing  four times from 2002-2006), Duke Paoa Kahanamoku (August 24, 1890 January 22, 1968, th e Father of Modern Surfing) and Rell Sunn  (Female World Surfing champion, known as the Queen of Makaha) are among the most famous American surfers. (Warshaw, M., 2005) Surf music was most popular in the 1960s. It is divided into two significant forms – instrumental surf rock (main melody is lead by an electric guitar or saxophone) and vocal surf pop presented by ballads and dance music. One of the most famous surf bands of the 1960s is considered to be â€Å"The Beach Boys†. (Warshaw, M., 2005) Jason Mraz and Colbie Caillat are among the most popular contemporary surf singers. The surf culture has also created its own language style. In general this language is slang, which is only understandable to close members of the surf society. For example, a cut-back  is â€Å"a surf maneuver; its a 180 ° turn thats done on either of the two rails of the surfboard, basically reversing the direction that you are surfing in† or mushy  identifies slow and slapdash waves giving little force not enough for great surfing. (Surf speak, 2010) Surfing has become not only a lifestyle, but a swiftly developing industry, a flourishing culture and for many is an integral part of the American dream. Surfers from all over the world come to the coasts of the Hawaiian Islands and California in the hunt for enormous waves with the aspiration to catch the ultimate ride and experience the magnificence of the ocean. Reference History of surfing. Surf culture. (2010). Club of the Waves. Retrieved November 22, 2010 from http://www.clubofthewaves.com/surf-culture/history-of-surfing.php Surf speak. Surf culture. (2010). Club of the Waves. Retrieved November 22, 2010 from http://www.clubofthewaves.com/surf-culture/surf-speak.php Twain, M. (2007). Roughing it. Digireads.com Publishing. p. 228 http://books.google.com/books?id=gjUOvGeK51MCprintsec=frontcoversource=gbs_ge_summary_rcad=0#v=onepageqf=false Warshaw, M.  (2005). The Encyclopedia of Surfing.  Houghton Mifflin Harcourt. pp. 776-7.

The Roles Of Light And Dark Imagery - 1384 Words

Analysis of the roles of light and dark imagery in Banana Yoshimoto’s Kitchen In the novella Kitchen, Banana Yoshimoto uses light and dark imagery to develop realistic characterization and to support her fantastical style, while effectively projecting pathos upon the readers. Throughout the story, Mikage unveils that life is a process of healing where grief and sadness are needed to truly appreciate happiness. Such abstract ideas and emotions are detailedly brought about by Yoshimoto’s usage of the four seasons of the year to provide a main timeline of the events concerning Mikage’s encounters with death, as well utilizing cosmos as a form of pathetic fallacy during the more miniscule experiences. In the grand scheme of the story, there†¦show more content†¦Following Spring was the â€Å"one summer of bliss† (59) occurring â€Å"in [the Tanabe’s] kitchen’’ (59). This period containing longer, bright days of joy and fullness d emonstrates to the readers the extent of Mikage’s contentment through the motif of nurture brought by cooking in the kitchen, especially in the Tanabe’s kitchen. In face of the season of death and preparing for an end, â€Å"Eriko died late in the Autumn.† (44) Much grief and despair fell upon Mikage and Yuichi as the dark Autumn imagery clearly reflects these negative emotions. There was a discrete transition from Autumn to Winter as death and preparing for an end goes hand in hand with voidness and despair. The four seasons of the year which range in different exposures to lightness are perfectly used by Yoshimoto to express the continuity of the cycle of grief and joy as time advances. Yoshimoto provides an overall transition between darkness to lightness from the beginning of Kitchen to the end, which demonstrates Mikage’s developmental journey in discovering that time will constantly move despite any abruptions in life and no one will be capable of preventing it. Proceeding the death of Mikage’s grandmother, she is once again stuck with a â€Å"hollow in [her] heart† (56) the following Winter as it was the grieving period for Eriko; however, now she has developed a philosophy that â€Å"[she] wants toShow MoreRelatedTheme Of Light And Dark Imagery In Oedipus The King1316 Words   |  6 PagesSophocles’ masterful work, Oedipus the King, exemplifies the significance of imagery within literature. The perpetual presence of light and dark imagery effectively strengthens the dramatic aspects of catharsis, anagnorisis and mimesis. These factors continually impose the audience to establish a personal connection with the literary work. As an individual, Oedipus possesses the unfortunate attribute of hubris; his ego ultimately causes his tragic demise and convincingly elicits catharsis, anRead MoreImagery, Symbolism and Motif in Heart of Darkness1053 Words   |  5 Pagesexplores the depths of imagery, motif and symbolism. Arguably the biggest motif explored in Heart of Darkness is that of ‘Light’ and ‘Darkness’. Conrad’s use of ‘light’ and ‘darkness’ imagery is reflected through devices such as setting and atmosphere. The extract begins rich with imagery as Marlow talks of the â€Å"Light† that â€Å"came out of this river†, emphasising the idea that through invasion, the Romans diminished the â€Å"darkness that was here yesterday† in their brief â€Å"flicker† of light. This almost suggestsRead MoreImagery in Macbeth by William Shakespeare Essay example532 Words   |  3 PagesImagery is a way to amplify theme in Macbeth by William Shakespeare. It portrays many different themes in the play. Imagery is used in many different ways, such as blood, animals and, light and dark. Blood plays a significant role in this play and there is a lot of blood being shed, giving us a sense of horror and guilt. Macbeth makes his first kill after killing Duncan and he is freaking out about the blood on his hands. â€Å" Will all great Neptune’s ocean wash this blood Clean from my hand? No: thisRead More Light and Dark Imagery in Joseph Conrads Heart of Darkness Essay594 Words   |  3 PagesLight and Dark Imagery in Joseph Conrads Heart of Darkness   Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  Heart of Darkness by Joseph Conrad is a novel about a man named Marlow and his journey into the depths of the African Congo. Marlow is in search of a man named Kurtz, an ivory trader. Though Marlow?s physical journey seems rather simple, it takes him further into his own heart and soul than into the Congo. The setting, symbols and characters each contain light and dark images, these images shape the central theme of the novelRead MoreDark And Light Imagery Within The Hobbit Essay example1677 Words   |  7 Pagesamount of imagery in his writing which can been seen through settings in The Hobbit. The imagery is usually either dark or light, depending on Bilbos mood and contrast of his surroundings. J.R.R Tolkien uses dark and light imagery in The Hobbit to effectively set an eerie and mysterious mood and to foreshadow events such as Bilbos journey in Mirkwood and his adventure in the Mountain. To understand Tolkiens use of imagery, one must understand imagery as a concept. Imagery refers toRead MoreThe Tolkien s The Hobbit1580 Words   |  7 Pagesmakes good use of imagery in his writing, and it is quite apparent in this work. The imagery is typically either dark or light and directly correlates to Bilbo’s mood. J.R.R Tolkien uses light and dark imagery in his novel The Hobbit to effectually set an uncanny and secretive mood and to foretell future activities such as Bilbo s expedition through Mirkwood and his escapade in the Mountain. To understand Tolkien s use of imagery, one must understand imagery as a concept. Imagery refers to wordsRead MoreDark and Light Imagery Within the Hobbit1605 Words   |  7 Pagesamount of imagery in his writing which can been seen through settings in The Hobbit. The imagery is usually either dark or light, depending on Bilbos mood and contrast of his surroundings. J.R.R Tolkien uses dark and light imagery in The Hobbit to effectively set an eerie and mysterious mood and to foreshadow events such as Bilbos journey in Mirkwood and his adventure in the Mountain. To understand Tolkiens use of imagery, one must understand imagery as a concept. Imagery refers toRead MoreImagery in Macbeth by William Shakespeare702 Words   |  3 PagesImagery in Macbeth The tragedy of Macbeth is a compelling story by William Shakespeare about the fall of a once noble man who becomes a tragic hero. The story of Macbeth is about a man who let his desires result in him becoming an evil man. Shakespeare uses many forms of writing to portray his story; one main technique used is imagery. Imagery is used consistently throughout Macbeth to help the reader thoroughly understand the theme of the play. Many forms of imagery are used, however, theRead MoreDarkness Imagery In Macbeth Essay899 Words   |  4 Pagessuitable for the play than darkness imagery. Imagery is a very important aspect of literature. Many different types of imagery exist and there is at least one dramatic purpose for each image. By analyzing William Shakespeares Macbeth, it is evident that darkness imagery is used for three dramatic purposes. Those three purposes are to create atmosphere, to arouse the emotions of the audience and to contribute to the major theme of the play. The darkness imagery in Macbeth contributes to its ominousRead MoreHow Is the Image of Darkness Used and Developed Throughout Macbeth?729 Words   |  3 Pagesin which evils were most free since it was not purged by the sunshine. Shakespeare uses the dark imagery to create a mysterious and gloomy atmosphere. It also manipulates the audience’s emotions by evoking an emotional response. Furthermore, it is used to develop the characters and show how they change. There are many reasons for the repeated motif as it is a very powerful metaphor. The darkness imagery in Macbeth contributes to its ominous and threatening atmosphere. From the first lines of the

Drawing On What You Have Learned About City Road Persuasive Essay Example For Students

Drawing On What You Have Learned About City Road Persuasive Essay This road is used by people of all different ages and ethnicities. It is a very busy one way street, that leads you to the main town centre. Will be looking at the social order is made through the street environment and how is it repaired by the police. Social order is all about how people behave in society. It is needed in order tort society to function properly, Making refers to the activities that people take part in and the relationship they have with other people and objects. An example to his is shown on City Road, through the way the street environment is organized. They have blue bollards at a certain height, in order to make sure vehicles cannot come up onto the path, causing problems for the pedestrians, especially people with prams and wheelchair users. They also have traffic islands, in order to make crossing easier for pedestrians. On the road, there is different colored tarmac, to make it clear to drivers veers to drive and it also makes things safer when pedestrians cross the road. This is different to SST Helene Street, there is only raffia lights to help pedestrians across. However, this slows traffic down and disrupts order. TO try and resolve this, they are currently putting bollards and traffic islands in place as it is a very busy street. But this in itself is disrupting social order as it is causing traffic jams along the road. The street environment is an example of an invisible process of making social order, as people take for granted. Repairing refers to the activities people take part in, in order to make society a better place e. G. Street cleaners making the sure the streets are kept clean. Even though we know that there are people that do this, we take it for granted. This is an example of invisible processes of repairing. The police help to repair and reinforce social order on SST Helene Street, especially at night. There are a lot of restaurants and takeaways on this street and it gets very busy at night times, so the police are always on hand along this street in case of any trouble, Police are also starting to take on more of a role in the community, helping to make sure our streets are clean This is the same on City Road and the operation Clean Sweep. Ordered Lives, Scene 2) The police are also on hand on City Road. They are they to control the behavior of others and also to make sure the noise levels are kept down. An example of the police on City Road would be When Jerome was stopped by the police, for having no driving license or insurance. (Ordered Lives, Scene 3). This is an example of a visible process. The use Of CATV on SST Helene Street is very important in repairing social order. It is a very busy street and also an area of high crime activities. By having the CATV cameras in place, it it also helps the police in their role Of repairing social order. With technology as sophisticated as it is today, the cameras are able to zoom in and scan areas. This is the same on City Road, where CATV cameras help the police to identify anti social behavior and traffic violations. Overall, some processes of making and repairing social order happen on almost every street as they help things to run smoothly. Having these processes in place is very important within our society. There are some processes that invisible, which we take for granted and others, that are more visible to us.